Beitian BF-180 GPS Module
£16.95
Beitian BF-180 GPS Module for FPV drones, fixed wings and RC builds.
Compact 18mm GNSS receiver with M10050 chip, GPS/BDS/Galileo/QZSS/SBAS support, TTL UART output and approx. 4.9g weight.
Ideal for Betaflight GPS Rescue, INAV navigation and OSD GPS data.
In stock
Beitian BF-180 GPS Module
The Beitian BF-180 GPS Module is a compact GNSS receiver for FPV drones, fixed wings and other RC builds that need reliable satellite positioning. It is a useful upgrade for pilots wanting GPS support for Betaflight GPS Rescue, INAV return-to-home, speed, distance and home direction features.
With its small 18mm form factor and lightweight design, the BF-180 is well suited to compact FPV builds where space is limited. It connects to a spare UART on your flight controller using the standard GPS wiring layout: 5V, ground, TX and RX.
Compact GPS for FPV Builds
The BF-180 uses a modern GNSS receiver design with support for multiple satellite systems, including GPS, BDS, Galileo, QZSS and SBAS. This gives your flight controller access to positioning data for navigation, telemetry and rescue features when configured correctly.
It is a good option for 5″ freestyle quads, long-range builds, compact cruisers and fixed-wing models where GPS support is required but a large GPS module would be awkward to mount.
Betaflight and INAV Friendly
For Betaflight, the BF-180 can be used for GPS Rescue, home direction, distance-to-home, ground speed and satellite count in the OSD. For INAV, it can be used as part of a return-to-home or navigation setup, depending on your full configuration.
Please note that GPS performance depends heavily on mounting location, antenna view of the sky, electrical noise, VTX placement and software setup. For best results, mount the module away from high-current wiring and give it a clear view of the sky before take-off.
Product Highlights
- Compact Beitian GPS / GNSS module for FPV drones
- Suitable for Betaflight GPS Rescue and INAV navigation setups
- Small 18mm form factor for easy mounting
- Supports GPS, BDS, Galileo, QZSS and SBAS signals
- M10050 GNSS chip
- TTL serial output for flight controller UART connection
- NMEA and UBX protocol support
- Default baud rate: 115200bps
- Lightweight design at approx. 4.9g
- Useful for home direction, distance-to-home, speed and satellite count OSD data
Product Information
| Brand | Beitian |
| Model | BF-180 / BE-180 |
| Product Type | GPS / GNSS module |
| Chip | M10050 |
| Satellite Support | GPS, BDS, Galileo, QZSS, SBAS |
| Default Positioning System | GPS, BDS, Galileo |
| Protocol | NMEA / UBX |
| Baud Rate | 4800bps–921600bps, default 115200bps |
| Update Rate | 0.25Hz–18Hz, default 1Hz |
| Input Voltage | DC 3.6V–5.5V, typical 5V |
| Current | Approx. 15mA at 5V |
| Dimensions | Approx. 18 x 18 x 6.1mm |
| Weight | Approx. 4.9g |
| Connector | 1.00mm 4-pin connector |
Basic Wiring Guide
- GPS VCC to flight controller 5V
- GPS GND to flight controller GND
- GPS TX to flight controller RX on a spare UART
- GPS RX to flight controller TX on the same UART
In the Box
- 1x Beitian BF-180 GPS Module
- 1 x 125mm Cable
Please note: GPS setup requires a spare UART and correct configuration in Betaflight, INAV or your chosen flight controller software. Cable/pinout may vary by batch, so always check the module markings before connecting power.
| Weight | 101 g |
|---|





