Darwin59 116mm F4 OSD 30A BLHeli_S Dshot600 40CH 25mW 700TVL (Receiver not included ) (3S)

Darwin59 BNF toothpick FPV racing quad-copter

DarwinFPV enters the toothpick field. This is a well built  and powerful little quad-copter.  The Darwin59 houses a F4 flight controller and  a 4in1 30A  blheli_s ESC’s  (30A? hmmmmm.) the toothpick cuts through the air smoothly. A non descript camera has been used, but the image is clear but I’ve had better 🙂 . The 4in1 ESC is connected to the motors via LED motor wires, giving the device a solid field. You will need to pop the hood and install a receiver, you can direct solder your receiver or we recommend you use the pinned connector on the flight controller. Cables and a connector are provided in this kit. We recommend since you have the hood off it’s a good opportunity to remove the FC and house your receiver between the ESC and FC, We also suggest you configure betaflight, before you screw down the canopy as the USB connector cannot be reached with the canopy in place.

Product Information.

OK

In the box.

1 x Darwin59 PNF toothpick FPV racing quad-copter

4 x Propellers 3016

1 x Connector and Cables for receiver

2 x Antenna Tubes & rubber ends.

1 x Pack of screws

1 x Pack of cable ties.

1 x Assortment of rubber bands.