DIATONE ROMA L3 4S BNF MSR FPV DRONE.
The latest 3 inch freestyle quadcopter features, Frsky D16 receiver, A F411 AIO flight controller and 1206 3600KV motors. The usual build quality and excellent electronics are included in this BNF of the DIATONE ROMA L3 4S. The receiver is a Frsky D16 none EU version. The kit also include various cables so you can easily install a receiver from TBS etc.
We recommend you use a 4 s 650MAh – 850MAh lipo, This little device is an excellent cruiser, go low or high, the DIATONE ROMA L3 4S FPV quadcopter slices through the air without fuss. Be mindful this kind of setup is not a “beast” freestyle quadcopter, but rather a gentle cruiser mostly. But apply the throttle, it will take off with precision.
A lot of instructions are include, as it is with all Diatone products. You can get a spare carbon frame here.
You might want to invest in a professional transmitter, we strongly recommend the Jumper T Lite, the multiprotocol version, The jumper will easily bind to this Diatone 3 inch FPV quadcopter, as well as other similar devices in your fleet of FPV quadcopter’s. The Jumper is an excellent choice, as it’s compact and runs from a single 18650 lion battery. The Roma L3 F4s Frsky also comes in a HD version, which includes the excellent Caddx Vista HD FPV air unit and Camera.
- Camera: RUN CAM NANO2
- Antenna: MAMBA Ultras RHCP
- VTX: MAMBA TX400
- FC: MAMBA F411 AIO
- ESC: MAMBA 25A 8BIT
- Motor: MAMBA 1206 3600KV
- Receiver MAMBA MSR D16
- HQ T3×2.5×3 ×1
- HQ T3×1.8×3 ×1
- Buzzer ×1
- Strap ×3
- M2 Screws Pack×1
- 20mm PC isolation Pcs ×1
- GOPRO Universal Gopro Mount×1
- GPS Top Lipo strapMOunt:22×20mm
In the box.
- A DIATONE ROMA L3 4S BNF MSR FPV DRONE