Flywoo GOKU GN 745 40A AIO BL_32

This is the new Flywoo Goku GN 745 40A AIO,  GOKU GNF745 40A FC is one of the most advanced all-in-one FC. This board is DJI/Caddx HD ready, with 7 UARTS you have plenty options to install and run various flight components.

The Goku GN 745 uses a  powerful F745 BGA chip and BLHELI_32 ESC firmware, integrate 5V/9V dual BEC, barometer, black box, WS2812LED, support 7 complete hardware serial ports, I2C and other functions are all open.
This is currently the most integrated and powerful FC AIO board on the market.

It brings users a more stable and smoother flight.! Perfect for ultralight quad! Flywoo provides another powerful FC AIO board.

Highlights

• F745 MCU
• Barometer
• Dual BEC
• Black Box
• 40A 32Bit ESC
• 7 UARTS

GN745 AIO Flight Controller

• MCU: STM32F745 32-bit processor,216MHz, 512Kbytes Flash
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• Onboard LED：WS2812*4
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 7 hardware UARTS (UART1,2,3,4,5,6,7)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
• PPM and PWM receivers are not supported.
• Onboard 8Mbytes for Blackbox logging
• 9V Power Out: 1.5A max
• 5V Power Out: 2.0A max
• 3.3V Power Out: 0.5A max
• Dimensions: 33.5×33.5mm
• Mounting Holes: Standard 25.5/26.5mm square to center of holes
• Weight: 8.5g

Built-in 40A BL_32 4in1 ESC

• Support Blheli / BLHELI_32
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
• Input Voltage: 2-6S Lipo
• Continuous Current: 40A
• Firmware: BLHELI_32

In the box

• 1x GOKU GN 745 40A AIO BL_32  (MPU6000 ) 25.5 X 25.5

More Information

• Betaflight Firmware target: FLYWOOF745
• INAV Firmware target: FLYWOOF745
• GOKU GN 745 40A AIO BL_32 Wiring Diagram
• Flywoo Support Pages

Flywoo GOKU GN 745 40A AIO BL_32 Pinout Diagram