FPVCYCLE BABYTOOTH Frame

This is the FPVCycle Babytooth Frame

The Babytooth toothpick frame is currently available in a 2mm and 3mm thick carbon plate.

This hugely popular and sought after light weight format is designed with a 1S to 3S drivetrains in mind.

• 1.5mm frame    – 1S recommended build
• 2mm  frame      – 1S recommended build
• 3mm frame       – 3s recommended build

FPVCycle recommends you use the 1.5mm and the 2mm frames with a 1S 3” drivetrain for a super fun and safe 46-55g AUW quad,  that will knock your socks off!

The same pattern is offered in a 3mm frame for a 3S drivetrain if you prefer a unibody over the TP3.

The Babytooth 3mm frame is impressively stiff and confidence inspiring in this design and it’s still only 8.3g.

You should be aware that the 1.5mm version is not as strong as the 2mm version but it is about 1.1g lighter.

This design is called the ‘Babytooth’ not because it’s smaller than the TP3, but because it supports 1S better and is simpler than the TP3. After some heavy refinement, this is the final pattern we landed on.

This frame is cut from T700 carbon but It does not have a chamfer edges. This frame is supposed to be a high value item with the majority of the design time invested into optimizing performance, weight and durability.

Customizing the frame with your own hand done sanding on the edges is up to you (Harsh).

Product Information

• 115mm diagonal for 3” props
• T700 carbon
• 1.5mm thick ~4.2g (carbon only)
• 2mm thick 5.3g (carbon only)
• 3mm thick 8.3g (carbon only)
• Motor protection bumper
• FC Mounting: 25.4×25.4mm M2 (Whoop mount)
• FC Mounting: 16×16 M2 also on there

More Information

The latest version seen in the product pictures has thicker arm ends for more motor protection and a cross bar on one of the arms designed to mount the Mini Mortal T antenna.  The overall frame design has also had minor adjustments to it’s lines to improve durability further.

• Build Guide