FUS X111 Pro 2.5″ 111mm 2~4S Cinewhoop 12A ESC & F411 AIO Board FUS 1106 Motor – PNP
This is a great 2-3S Power whoop, this is the FUS X111 Pro 2.5″. You will to install a receiver.
The FUS X-111 is a 2.5-inch ducted-fan quad which was designed to flying in any narrowed space, and without common disadvantages of 2 or 3-inch such as hard to control, limited flying time, etc. Whether for beginners or pros, the FUS X-111 can perfectly provide you similar experience to a larger quad with a reasonable price of 2-inch quad. The FUS X-111 is NOT supplied with a receiver, allowing to use a receiver of your choice.
The material combination of CF/ABS/EVA along with triangle/cross structure, can provide you higher durability and intensity with minimum weight.
Thanks to the ultimate weight-reduce design, the FUS X-111 can provide you more than 8 minutes indoor flying by a 4s 500mah battery, and performance way better than an ordinary 2-inch quad.
The FUS X-111 can install the DJI-Vista HD Digital FPV system, or HD recording/FPV camera. Also you can mount your motion camera such as Runcam video recorder, gopro, Insta360 Go on the X-111 with the help of 3D printed parts. Either way, X-111 is perfectly capable for HD FPV or filming.
|Motor||FUS 1106 3800KV|
|Video transmission||5.8G IRC Tramp 200mw|
|Camera||Runcam nano 2|
|Recommended battery||2-4S lipo 450-650mah|
Note: Camera Mount is Not Included !
F411 & 20A AIO board
- Size: 32.5*32.5mm
- Mounting pattern: 25.5*25.5mm (3mm half-hole)
- Connector: Micro-USB
- MCU: STM32F411
- Gyro: MPU6000(SPI)
- BEC output: 5V 2A
- Constant current: 20A,25A(Peak)
- Input: 2-4s (support HV）
- Current sensor：Included
- BLHeli: BLHeli-S
- Target: MATEK F411
- ESC Firmware:G_H_30 BLS
- VIDEO TRANSMISSION
- Power— 25MW/100MW/200MW
- Smart Audio: IRC Tramp
- Number of signal channel: 40
- Frequency adjustment short press button
- Power adjustment Long press button（≥2 sec.)
You will need to supply and install a receiver.