FX805 Tiny Whoop Camera 25mw
This is the excellent FX805 Tiny Whoop Camera 25mw, great on brushless or brushed 1s whoops.
Have you been struggling with the camera on your Whoop type quad, well let us help you out, the tried and test fx805 25mw all in one camera and vtx combo. This model is used on the Blade Inductrix and favoured by the Tiny Whoop team.
You can pick either the linear antenna or the right hand circular polarised version. I prefer the dipole version because it limits the damage to the antenna in a crash test. it has been said the polarised antenna gives you a better image. But I found the linear antenna just as good.
So what you waiting for 🙂
Product Highlights
- Micro sized and lightweight (4.5g)
- 40CH VTX
- Easy install, plug and play
- Push button control instead of switch to change channels
- Powered by 1S 3.5V LiPoly battery
- Built in mounting case for the Blade Inductrix.
- Mounting Case angled 20 degrees back for forward flight optimization.
Specs
- Transmitter power: 25mW
- Input power: 2.5~5V
- Camera resolution: 600TVL
- Min illumination: 1 lux
- Field of view: 140deg viewing angle
- Antenna dimensions: 20 x 25mm diameter
- Antenna: 3 lobe right hand circular polarised
- Video output: NTSC
- Frequency: 5.8GHz 5 bands 40 channels
- Raceband: 5658-5917
- Size: 21x19x17mm (excluding antenna)
- Weight: 4.8g
Product Information
The FX805 Micro FPV Camera & 5.8GHz 40CH 25mW VTX with Mounting Case is extremely small and easy to install on the Blade Indicatrix. The unit is ultra-lightweight, so it is easy to place on any aircraft without affecting the COG. Most multi-rotors wouldn’t even notice it was there. This Camera / VTX combo is the perfect choice for adding FPV to the Blade Inductrix micro quadcopter.
It’s easy to install and operate with one push button to change channels and bands. Just plug into a little 1S Lipo battery or onto your 5V rail and you are ready to go.
It has excellent video and low latency for such a small package. The combo also includes a splitter and a circular polarized 5.8G tuned antenna for the best video signal.
How to change channels
First red LED for channel, other 5 blue LEDs for frequency/band
1. Single press channel/band button to change channel, channel LED always keeps red for 1st channel of any band, for other channels, channel LED OFF.
2. Press and hold channel/band button for 2 seconds to change frequency/band
Below is the channel table for your reference.
CH FR | CH | ||||||||
CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | ||
FR | FR1(F) | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
FR2(E) | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 | |
FR3(A) | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 | |
FR4(R) | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 | |
FR5(B) | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
Reviews
There are no reviews yet.