GEPRC SMART16 Freestyle FPV Drone
This is the GEPRC Smart16 Freestyle FPV Drone.
The new GEPRC SMART16 is a 1.6-inch mini-quadcopter, currently available in 4 receiver versions: PNP, AC900, ELRS 2.4G and TBS Crossfire Nano.
SMART 16 follows the lightweight design concept of the Phantom series.
With 1.5mm carbon fibre arms and a 1mm top plate allows it to be lightweight as well as tough. GEPRC has used 11000Kv 0803 brushless motors paired with 1610 props, all adds up to a fun freestyle quadcopter.
This Nano quad comes with a 3D printed battery holder and will be powered by 2 x 1S lipo’s of your choice, the Smart 16 weighs as little as 53.0g and with a estimated 4 minutes of flight time.
GEPRC is dedicated to its pursuit to build the lightest quad, that provides an all round better flying experience.
- Model: SMART16
- Frame: GEP-ST16
- Wheelbase size: 78mm
- Top plate thickness: 1.0mm
- Bottom plate thickness: 1.5mm
- Arm thickness: 1.5mm
- FC: STABLE F411 FC (16*16mm)
- MCU: STM32F411
- IMU: MPU6000(SPI)
- OSD: BetaFlight OSD w/AT7456E chip
- ESC: STABLE F411 BL_S 4IN1 12A ESC(16*16mm)
- VTX: STABLE F411 VTX 5.8G 200mW(16*16mm)
- Camera: Caddx Ant
- Propeller: GemFan 1610-2
- Antenna: UFL 5.8G stick VTX antenna
- Motors: GR0803-11000KV
- Weight: 36.0g
- Receiver version: PNP (without a receiver), AC900, TBS Nano RX, ExpressLRS 915, ExpressLRS 2.4G
- 1.6 inch tiny size + light weight, just 36.0g
- Uses two 1S batteries in series for greater power output
- Equipped with 200mW 5.8G VTX, with 6 frequency bands and 8 frequency point selection
- Caddx Ant camera with high quality image. Clear and clean!
- Independent battery compartment design, can be stacked on top or bottom, making it easy and convenient to switch batteries.
- The latest 0803 motor is matched with 1610-2 propeller proving maximum power and efficiency
- Suitable for both freestyle and racing
- Includes a full set of high quality 3D printed parts for superior flying experience
In the box
- 1 x SMART16 set
- 4 x GemFan 1610-2 propellers
- 2 x Battery tie M12x120mm
- 2 x Battery non-slip mat
- 1 x Spare printed set
- 1 x Spare screw pack
- 1 x Spare screwdriver set