GEPRC STABLE F411 16×16 Stack
£57.15
STABLE F411 is equipped with F411 FC, 4IN1 BLS 12A ESC and 5.8G PIT/25/100/200mW.
Out of stock
GEPRC STABLE F411 16×16 Stack
The GEPRC STABLE F411 16×16 micro tower electronic system is the best and latest electronic system solutions for micro quads designed by GEPRC.
STABLE F411 is equipped with F411 FC, 4IN1 BLS 12A ESC and 5.8G PIT/25/100/200mW.
Lipo
The stack supports 2-4S batteries, which could meet various kinds of demanding environments.
Design
With the three-layer structure design and completely optimized pad structure, wiring is simpler and more reasonable.
The STABLE F411 adopts 16*16 mm mounting holes and pin-type modular design. Supporting IRC TRAMP protocol, you can directly adjust VTX frequency, frequency and flight control parameters in the OSD interface, which is very convenient and easy to use. With LED interface, you can program your LED strip with Betaflight Ground Station. You can clearly see aircraft’s voltage, current, battery usage and other information with integrated OSD chip.
VTX
STABLE F411 is equipped with a 200 mW VTX, which can easily cope with various flight environments. While the build-in PIT mode (low power mode) is very convenient for competition use, your VTX will not affect others when adjusting the frequency. A professional 5.8G linear antenna is equipped to achieve ideal transmission effect.
Receiver
STABLE F411 supports a variety of receivers including SBUS, PPM, CRSF, DSMX, iBus protocols, which can be used with your remote control.
Product Information
- MCU: STM32F411
- IMU: MPU6000 gyro/accelerometer (SPI)
- Continuous current: 12A
- Input voltage : 2-4S LIPO
- Power : PIT/25/100/200mW
- Integrated LC Filter
- Mounting holes: 16mm*16mm
- Support:Sbus,PPM,CRSF,DSMX,iBus
STABLE F411 Flight Controller (16*16mm)
- MCU: STM32F411
- IMU: MPU6000 gyro/accelerometer (SPI)
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC Output: 5V@2A
- Size: 21mm*21mm
- Mounting holes: 16mm*16mm
- Integrated LC Filter
- Input voltage 2-4S LIPO
- Firmware target: MATEKF411
- Weight: 2.5g
STABLE F411 BLheli_S 4IN1 12A ESC (16*16mm)
- MCU: BB21F16G
- Continuous current: 12A
- Input voltage : 2-4S LIPO
- ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
- Size: 23mm*21mm
- Mounting hole: 16*16mm
- Firmware target: Blheli_S G_H_30
- Current meter: 210
- Weight: 2.7g
STABLE F411 VTX 5.8G 200mW (16*16mm)
- Power : PIT/25/100/200mW
- Antenna interface : IPEX (UFL)
- Telemetry: IRC Tramp
- Size: 17mm*27mm
- Mounting holes: 16*16mm
- Integrated LC Filter
- Weight: 1.6g
In the box
- 1 x STABLE F411 Flight controller
- 1 x STABLE F411 BLheli_S 4IN1 12A ESC
- 1 x STABLE F411 VTX 5.8G 200mW
- 1 x 5.8G Antenna
- 1 x XT30 Cable


| Weight | 210 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
5" Frames
30 x 30 ESC
30 x 30 ESC


























Reviews
There are no reviews yet.