Happymodel Mobula7 O4 2S 80mm HD Microwhoop

 

Introducing the Mobula7 O4 2S 80mm Digital HD Micro FPV Whoop – Unmatched Performance, Stunning HD Vision

Elevate your FPV flying experience with the Mobula7 O4 2S 80mm HD Micro FPV Whoop, a powerhouse in a compact frame.

Built for enthusiasts seeking performance and clarity, it integrates the cutting-edge DJI O4 Air Unit for breathtaking HD visuals. Offering crisp, sharp footage that will make every flight unforgettable.

Designed for agility, the Mobula7 O4 features RS1102 KV10000 motors paired with HQPROP 45mm tri-blade propellers.

You can now enjoy exceptional control and smooth freestyle flying, both indoors and out.

Supporting 2S battery power and featuring a UART ExpressLRS receiver, you’ll enjoy stable control and thrilling flight times.

The lightweight build ensures effortless maneuverability, while its high-performance flight controller and ESCs deliver smooth, reliable power to handle all your tricks.

Perfect for both experienced pilots and newcomers looking to dive into HD FPV flying, the Mobula7 O4 is your gateway to stunning visuals and unparalleled flight experience. Ideal for close-quarters freestyle flying, its compact design is perfect for tight spaces, making it an absolute must-have in your FPV arsenal.

Fly beyond the limits with the Mobula7 O4 2S 80mm — where stunning HD clarity meets smooth, responsive performance.

 

Product Highlights

• Equipped with the New DJI O4 Lite air unit
• Powered by a 2S battery, Enjoy Powerful and Smooth freestyle flying
• Serial Based ( UART) ExpressLRS receiver. Stable control link.
• Light and compact ideal for indoor FPV cursing

Production Information

Motor	Mode: RS1102 KV10000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*14mm Weight(g):2.8g No.of Cells(Lipo):1-2S
Propellers	Weight:0.33g Material: Poly Carbonate Pitch:0.9 Props Dia:45mm Hub Thickness:5mm Shaft:1.5mm
Flight controller	MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) GYRO Sensor: BMI270  (SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeli_S Bluejay firmware Factory firmware: Bluejay ESC V0.19 Firmware target: Z-H-30 Default protocol: DSHOT300 When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
Onboard UART ExpressLRS 2.4GHz Receiver	Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length Telemetry output Power: <12dBm Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Could update firmware via ExpressLRS configurator
DJI O4 Air Unit	Weight: Air Unit (camera module included): Approx. 8.2 g Transmission Module: 30×30×6 mm (L×W×H) Camera Module: 13.44×12.36×16.50 mm (L×W×H) Camera Cable Length: 50mm Coaxial Cable: 50 mm 3-in-1 Cable: 50 mm Operating Frequency: 5.170-5.250 GHz 5.725-5.850 GHz Operating frequency varies by region. Refer to local regulations. Transmitter Power (EIRP): 5.1 GHz: <23 dBm (CE) 5.8 GHz: <30 dBm (FCC) <14 dBm (CE) <30 dBm (SRRC) Live View Quality: 1080p at 30/50/60/100fps

 

If you want to use a DJI FPV Remote controller, please change betaflight settings like following picture,no need do any hardware modification to the flight controller:

***If you want to use DJI FPV Remote controller, Please first reflash betaflight firmware add add “SBUS” protocol support when load firmware online. And then please import defaulct factor dump file to CLI command , then change betaflight settings like following picture,no need do any hardware modification to the flight controller: