HappyModel Mobula8 DJI O3 (ELRS/ TBS)
£189.50
This is the HappyModel Mobula8 DJI O3 HD FPV whoop, inc a ELRS V3 or a TBS Nano RX. 80g/48g, 1103, 11000kv, 12A ESC
HappyModel Mobula8 DJI O3 (ELRS / TBS)
This is the Happymodel Mobula8 HD 2S 85mm FPV Whoop. This whoop is built in two versions the differential factor being ELRS or the TBS Nano receiver types.
Experience a new level of power and video clarity in your FPV flight, Say goodbye to lacklustre performance from your current 1S whoop and unleash the thrill of ripping roaring FPV in your backyard.
The Mobula8 is Happymodel’s ground-breaking 85mm frame creation, designed to push the limits of micro-drones.
Featuring the latest CrazyF405 ELRS HD flight controller, this drone offers unrivalled stability and precision control. Paired with the impressive EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, the Mobula8 delivers astonishing power and an unbelievably smooth flight experience.
Prepare to defy gravity as the Mobula8 effortlessly manoeuvres through the air with unparalleled speed and agility. Whether you’re performing jaw-dropping acrobatics or exploring new perspectives, this drone will exceed your expectations.
Elevate your flying skills and embrace a world of endless possibilities with the Mobula8 by
Happymodel.
Product Highlights
- Digital HD FPV experience
- New CrazyF405 ELRS HD flight controller
- Powerful and Smooth
- UART ExpressLRS receiver
- Built-in Blackbox for Gyroflow and PID Tune
Product Information
| Item Name | Qty |
| Mobula8 Frame | 1 |
| CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4 | 1 |
| EX1103 KV11000 brushless motor | 4 |
| Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) | 1 |
| Option1: DJI O3 Air unit | 1 |
| Option2: Walksnail avatar HD Mini 1S lite kit | |
| Option3: HDZERO Whoop Lite bundle | |
| Option4: No VTX and camera version, provide dipole antennas for O3 module | |
| Canopy(DJI O3/Walksnail/HDZERO optional) | 1 |
| Screw driver | 1 |
| Motor | Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S |
| Propellers | Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm |
| Flight controller | MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) GYRO Sensor: BMI270 (SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470 |
| Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeli_S Bluejay firmware Factory firmware: Bluejay ESC V0.19 Firmware target: Z-H-30 Default protocol: DSHOT300 When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200 |
| Onboard UART ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length Telemetry output Power: <12dBm Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Could update firmware via ExpressLRS configurator |
| DJI O3 Air Unit | Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2 D-Cinelike mode for Vivid Colors Flagship O3+ Video Streaming Customizable Canvas Mode 155° Super-Wide FOV 1/1.7-Inch Sensor Compact in Size |
| Walksnail version | Camera Model Avatar lite camera Image Sensor 1/2.7”1nch Resolution 1080P/60fps,720P/120fps,720P/60fps Ratio 16/9 4/3 Lens 2.1mm FOV 170° Aperture F2.0 Shutter Rolling Rolling shutter Min.Illumination 0.001Lux Weight 1.8g Dimensions 14*14*16mm VTX Model Avatar mini 1s module Communication Frequency 5.725-5.850GHz Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface JST1.0*6(Power in)JST0.8*4(USB) Mounting Holes 25.5*25.5mm Dimensions 30*30*6.5mm Storage 8G Recording 1080p/720p Weight 5.1g Operating Temperature -20-40℃ Channels 8 Wide Power Input 3.1V-5V Supported FC System Betaflight OSD Canvas mode Bitrate 25mbps 50mbps Latency Average delay 22ms Antenna IPEX |
More Information
| Weight | N/A |
|---|---|
| Receiver | ELRS 2.4Ghz, TBS XF |
Only logged in customers who have purchased this product may leave a review.
Related products
Whoop Propellers
HQ Micro Whoop Prop 1.2X1.2X4 (31MM)1MM Shaft (2CW+2CCW)-ABS
FPV Cameras
Whoop Propellers
Reviews
There are no reviews yet.