HappyModel SuperX V1.0 ELRS v3.0 AIO
£56.60
This AIO board is found in the Mobula6 2024 and it features A 5A ESC, VTX and a Serial ELRS RX. Out of the box the AIO is running Beta-flight 4.4
🇬🇧 UK Stock | Fast dispatch
In stock
🚚 Free UK delivery on non-LiPo orders over £100.
SKU: YFPV - 1H70035 Category: AIO Flight Controllers Tags: 2.4GHz ELRS, ELRS V3.0 Receiver, ExpressLRS receiver, FPV radio receiver, HappyModel SuperX, long range FPV, SuperX V1.0 Brand: HappyModel
HappyModel SuperX V1.0 ELRS v3.0 AIO
This is the HappyModel SuperX V1.0 ELRS v3.0 AIO board, found in the Mobula6 2024.
You will need to solder your motors to the board and only use a 1S lipo.
You greatly benefit from the onboard serial based ELRS receiver. Allowing the receiver portion of the board to operate independently from the firmware on the rest of the board.
This is the analogue version of the SuperX HD 1S board.
Product Highlights
- Users can build their very own Mobula6, 1S 65mm FPV whoop.
- Serial RX, ELRS v3.00
- Onboard 400mW video transmitter
- 5A ESC
- BMI270
- BT2.0 lipo connector.
Product Information
| Flight controller | SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 |
| Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 |
| Onboard Serial ExpressLRS receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: ExpressLRS firmware target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher) Available from Expresslrs version 3.4.0 RC2 |
| Onboard 5.8g VTX | Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
In the box
- HappyModel SuperX Mobula6 AIO flight controller
- UFL antenna
- BT2.0 lipo connector
- Screws and rubber grommet set.

More Information
| Weight | 101 g |
|---|
Related products
AIO Flight Controllers
SpeedyBee F405 V2 H2 CNC 40A AIO | Bluejay | 25.5×25.5 | 3-6S | Flight Controller
£65.50
AIO Flight Controllers
£56.60
AIO Flight Controllers
£43.80














