HAWKEYE FIREFLY X LITE HD CAMERA 4K 60FPS inc ND16 Filter
This is the Hawkeye Firefly X Lite HD Camera, a light weight HD camera for recording your very own Mr Steele copycat exploits.
Equipped with racing drone bracket, compatible with universal base (GoPro and SMO 4K), Supports two power supply modes, 2p port power supply and USB port power supply.
Equipped with 3s-6s battery buck module, it can be powered from the balance lead of your drone battery.
A general ND filter with a diameter of 22mm can be used
The bracket design can prevent the TF card from falling out.
Support image flip function, camera can be installed inverted.
Compatible with G3 universal stabilizer, it can shoot 4k60fps high-definition video.
Built in gyro4.0 EIS algorithm
With high precision six axis gyroscope and excellent algorithm, it can take high-quality and stable pictures at high speed.
Aircraft Remote Control module(Optional)
Using remote control cable, you can take photos / videos remotely through RC remote control.
Check out all our HD Action Cameras!
Product Highlights.
- 4K 60FPS
- Only 34g weight
- Ambarella H22S85 chipset
- Gyro 4.0 Image Stabilisation
- WiFi + BT4.1 Remote control
- SONY IMX377 12 Mega WDR CMOS
Product Information.
- Resolution:4K60FPS/2.7K60FPS/2.5K60FPS(Default 4k60FPS,can be switched freely)
- Lens Diameter:17.5MM
- it can compatible with GoPro filter!
- Image flipping function: Yes
- RC and AV OUT:YES
- Kind of MicroSD card supported:U3(Note: Low speed SD card will cause unstable)
- Maximum size of MicroSD card supported:512G
- Camera size:61×38×26 MM
- Weight:34g
- Compressed format:H.264
- Video format :MP4
- Diaphragm: F=2.8,7G1IR LENS
- Angle: Diagonal 150 degrees
- Working Voltage:5V
- Power supply:1A
- WiFi distance:10M
- Waterproof: No
- Six axis Gyro video stabilization: Yes
Firefly Features.
- POWER BOTTON;
- Type CUSB port;
- Video indicator;(flash when recording;
- record button;
- WiFi indicator ;(Light on when WiFi is on
- 2p power port(5V IN);
- Cooling hole;
- Microphone hole;
- TF card slot;
Button Functions 
Operating instructions
Use the 5V power supply on the drone to supply power to the camera, and then press the power button to turn on the camera, and the buzzer will ring three times quickly. When the camera is turned on, the default resolution of the camera is 4k60 frames. If you want to switch the resolution, you can press and hold the Record Button for 3 seconds to switch.
The switching sequence is: 4k60 frame (two beeps of the buzzer) / 2.7k60 frame ultra wide angle (three beeps of the buzzer) / 2.5k60 frame on anti shake (four beeps of the buzzer).
If the camera needs to flip 180 degrees to install, press the power button for 3 seconds after the camera is turned on, the camera will turn on the image flip function. After the camera is turned on, press the power button briefly to turn on the WiFi function, and then use the mobile phone to connect with the FIREFLY app. You can set camera time and parameters, preview and download videos.
Note : There are 3 options for you to select, The camera with ND16 Filter will be more faster.
Note: Power Cables setup.
In the box.
- 1*Firefly X Lite FPV Camera
- 1*Bracket
- 1*Step-down cable
- 1*2P cable
- 1*USB cable
- 1*Light shield
- 1*User Manual
- ND16 Filter
Reviews
There are no reviews yet.