Kakute F7 Mini Stack V2 – Tekko32 F3 Flight Controller & 45A mini ESC with ATLATL mini VTX Combo

Specifications

Flight Controller.

• MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 5.5 hardware UARTS (UART1,2,3,4,6,7)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• Onbord 16Mbytes for Blackbox logging
• 5V Power Out: 1.0A max
• 3.3V Power Out: 0.2A max
• Dimensions: 33x26x6mm
• Mounting Holes: Standard 20mm square to center of holes
• Weight: 4g
• B+ pad available on KakuteF7 mini V2, with IMU upgraded into MPU6000

Tekko32 F3 4in1 45A mini ESC

• BLHELI32 / F3 MCU/4x 45A
• New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
• 4x 45A F3 BLHELI32 ESC in 20×20 standard .Supports up to 50A burst and 45A continued.
• F3 MCU, runs double faster than F051
• 32bit ESC with BLHELI32 firmware
• Supports 3-6S lipo input
• PWM input, TLM supported
• Voltage output (VBAT)
• NO BEC
• Supports oneshot / Multishot / Dshot PWM
• Supports damped light
• Ext. cap needed for 6s (470uf 35v for 6s usage.)
• Mounting holes M2, 20x20mm
• Size:30 x 36 mm
• Weight: 7.8g

PIN MAP:

Some Tips:

• BLHeli_32 ESC Firmware Overview
• GitHub

ATLATL mini

Features

• Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
• Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
• TBS Telemetry Protocol input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
• MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
• Variable transmit power 25 mW or 100 mW.
• 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
• Tiny form factor for easy installation in tight racing builds.

Specifications

• Output Power: 0.5 mW (pit mode), 25 mW, 100 mW
• Antenna Connector: MMCX
• Input Voltage: 4.5 to 5.5 volts (nominal 5v power)
• Dimensions: 19x16x4.5mm
• Weight: 1.6g (without antenna)

Manual:

• Holybro Kakute F7 mini V2 Manual 
• Holybro Atlatl Mini Manual
• Holybro_Atlatl_HV_micro_Manual.pdf