MAMBA DJI F722 Mini MK2 40A 2-6S 8bit Flight Controller Stack

This is the Mamba DJI F722 mini MK2 40A 2-6S BL_S (8bit) flight controller stack.

If you are working on a 3″ build, this is the perfect stack, The DJI naming convention in the title means there is a dedicated connector port, that has been configured to supply the correct voltage for the DJI air unit. This port also negates the need to solder the air unit  wires to the flight controller..

This stack will fit a frame that has a 20x20mm mounting holes, this combination of flight controller and 4in1 ESC board, can be used in various frame sizes, we see it used a lot in light weight 3″ to 4″ FPV Multi-Rotor builds.

Product Information

Diatone Mamba F722 Mini MK2 Flight Controller

• Name: MAMBA DJI F722MINI MK2
• MCU: 216MHz STM32F722RET6
• GYRO: MPU6000
• Barometer: Yes
• OSD: Yes
• Blackbox: NO
• Uarts: 6 Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED
• F.Port: Yes
• RSSI: NO
• Buzz: Yes
• Input: 2~6S Lipo (8.4~25.2V)
• TVS Protection: Yes
• BEC:3.3V 0.5A& 5V 2.5A /9V 2A
• MOUNTING: 20mm, M2

Diatone Mamba F40_BLS Mini 4in1 ESC

• Name MAMBA F40_BLS MINI
• INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
• CONTINUE CURRENT: 40A×4
• BURST CURRENT: 45A (10S)
• BEC: No
• Target：BLHeli_S CH40 (Firmware version)
• SOFT: Dshot300/600
• TVS Protection: Yes
• MOUNTING: 20mm, M3/M2

In the box

• MAMBA DJI F722MINI MK2 Flight Controller
• MAMBA F40 MINI PRO ESC
• High-Frequency 470uF/35V ×1
• 8pin sh1.0 ×2
• DJI 8pin ×1
• 16AWG 60mm ×2
• AMASS Original XT60 lipo connector

More Information

• Diatone Support Pages