Mamba DJI F722 MK2 Flight Controller 30.5 X 30.5mm / M3
This is the Mamba DJI F722 MK2 flight controller, with a 30.5 x 30.5mm mounting pattern. It includes a connector port dedicated to the DJI digital system, this method will really benefit the user because the Mamba DJI F722 will provide the correct power to your digital unit, the connector port also saves the user from having to solder to the board. Another additional benefit the user experiences, is a neat and tidy build, if you take care and do a little bit of cable management, before closing the lid.
The Mamba DJI F7 has a well thought out board design, the pads are laid out in logical manner. Diatone has decided to go with slightly larger solder pads, this will help with advertent mishaps, for example when you’re soldering at 3 am and berating yourself, you should have gone to bed 5 hours earlier, now look how late you’re going to be getting to the office, this is the moment you end up rushing and leave a connection between the 5V and GND.
Having the larger surface area on the solder pads will not magically give you a clear run to the office but it could help you to avoid soldering “Mistakes”
Mamba DJI F722 MK2 Flight Controller
- MCU: 216MHz STM32F722RET6
- GYRO: MPU6000
- Barometer: Yes
- OSD: Yes
- Blackbox:16M Flash Memory
- UARTS : 6Set
- ESC Soft: DSHOT300/600/1200
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller: BF LED/MB LED（ 4 Set 2812 LED）
- F.Port: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25.2V)
- TVS Protection: Yes
- BEC: 3.3V 0.5A& 5V 3A & （DJI）9V 3A
- Mounting: 30.5mm, M3
In the Box.
- Mamba DJI F722 MK2 Flight Controller 30.5 X 30.5mm / M3
- Printed Pinout diagram
- Various mounting gummies and cables.
More Information. Mamba DJI F722