Mamba F722 Mini MK2 DJI Flight Controller (3-6S)
Your are looking at the Mamba F722 Mini MK2 flight controller with the 20x20mm mounting option. This would make a great flight controller for your next FPV quadcopter build, this could be the flight controller you need, Keep reading please, this Mamba F722 mini flight controller features a higher rated BEC to power the DJI air unit or the Caddx Vista/Polar units.
Mamba F722 Mini MK2 DJI FC Information.
- MCU: 216MHz STM32F722RET6 32BIT
- IMU: MPU6000
- Baro: No
- OSD: BF OSD
- ESC Soft: Dshot300/600/1200
- LED: Blue & Orange for FC Status, White 5V, Red 3.3V, WS2812 LED Control: BF LED Control
- Input: 2~6S Lipo (8.4~25V)
- VTS Protection: Yes
- UARTS:6 Ports
- DJI PORT SUPPORT
- BEC: 5V 2A&9V 1.5A
- FC Firmware: BetaFlight Target: MAMBA F722
- Mounting: 20×20mm,Φ2
- Dimensions: 30×36.5×13.5mm
- Weight: 3.9g
- In the Box:
- 1×FC MAMBA F722MINI DJI
Note. Because STM32F722 chip can heat up, if located in a low stack, please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.
Mamba F722 Mini DJI Pinout and Setup Diagram.