MAMBA Basic F405 MK3 Lite 50A 6S 4in1 8bit ESC

This is the Mamba Basic F405 MK3 Lite, that includes a F50_BLS ESC for your 5″ plus build.

Diatone continues to design and manufacture affordable flight systems, this is no different.

Product Information.

Flight Controller:  MAMBA Basic F405 MK3

• MCU: 168MHz STM32F45RGT6
• GYRO: MPU6000
• Barometer: Yes
• OSD: Yes
• Blackbox: 16M Flash Memory
• UARTS: 6Set
• ESC Soft: Dshot300/600
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED/MB LED（4 Set 2812 LED）
• S/F.Port: Yes
• RSSI: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25.2V)
• TVS Protection: Yes
• BEC:3.3V 0.5A&  5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
• MOUNTING: 30.5mm, M3

ESC: MAMBA F50_BLS ESC

• INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
• CONTINUE CURRENT:50A×4
• BURST CURRENT:55A (10S)
• BEC: No
• Target：BLHeli_S CH40
• SOFT: Dshot300/600
• TVS Protection: Yes
• MOUNTING: 30.5mm/M3

Product Highlights

Fixed

1. Add I2C function
2. When you connect the USB, the receiver and OSD settings can be saved
3. Increase the pad area
4. LED signal selection （when Mamba Led sys avaiable）
5. BEC short circuit protection
6. TVS instant high voltage protection 30V

Update

1. F405 models support F.prot（Most）
2. Upgrade the anti-interference cable
3. Use Type C（Most）
4. The pad area of Mini flight controller (20×20) increased by 140%

Added

1. Add self-recovery insurance to the receiver’s 5V power supply
2. Increase the camera VCC power supply pad
3. Standard flight controller (30.5×30.5) adds spare pad
4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

In the box.

1 x MAMBA STACK F405 MK3 50A 6S 8BIT
1 x High-Frequency 470uF/35V
2 x 8pin sh1.0
2 x 12AWG 100mm
AMASS Original XT60

More Information

Diatone Support Page