MAMBA Stack DJI F722 MK2 F50_BL32 6S 32bit ESC (30.5 x 30.5mm)

This is the Mamba Stack DJI F722 MK2 flight controller and a Mamba F50_BL32 ESC.

The flight controller has a dedicated port to connect the the DJI air unit, which provides the correct voltage for the air unit. The flight controller boasts 6 UARTS, enough to add a number of devices, i.e GPS, receiver, DJI air unit, Caddx FPV air unit.

The ESC is the Mamba F50_BL32, 6S ready, with 30.5 x 30.5 mm mounting pattern. With large lipo and motor solder pads, making soldering easy. The firmware target for this ESC is the BLHeli_32 MAMBA F50_BL32.

Product Information

MAMBA Stack DJI F722 MK2 F50_BL32 6S 32bit ESC (30.5 x 30.5mm)

Flight Controller Information

MAMBA DJI F722 MK2

• MCU: 216MHz STM32F722RET6
• IMU: MPU6000
• Barometer: Yes
• OSD: Yes
• Black box: 16M Flash Memory
• UARTS: 6 Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED/MB LED（ 4 Set 2812 LED）
• F.Port: Yes
• RSSI: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25.2V)
• TVS Protection: Yes
• BEC:3.3V 0.5A& 5V 3A & （DJI）9V 3A
• MOUNTING: 30.5mm,M3

ESC Information

• MAMBA F50_BL32
• INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
• CONTINUE CURRENT:50A×4
• BURST CURRENT:60A (10S)
• BEC: No
• Target：BLHeli_32 MAMBA F50_BL32
• SOFT: Dshot300/600/1200
• TVS Protection: Yes
• MOUNTING: 30.5mm/M3
• Supply :
  High-Frequency 470uF/35V ×1
  8pin sh1.0 ×2
  12AWG 100mm ×2
  AMASS Original XT60

In the box.

• MAMBA DJI F722 MK2 Flight Controller
• MAMBA F50_BL32 ESC
• Various cables
• Various stack mounting accessories

More Information

• Diatone Support Page