65mm

HappyModel Mobula6 HDZero BNF 1S Whoop (ELRS/FRSKY)

Name: HappyModel Mobula6 HDZero BNF 1S Whoop (ELRS/FRSKY)
Availability: InStock

£188.20

HappyModel is introducing the Mobula6 65mm BNF 1S whoop in partnership with HDZero. This whoop is using the new 1S digital VTX and HD Nano camera.

Receiver

Clear

HappyModel Mobula6 HDZero BNF 1S Whoop (ELRS/FRSKY)

Join Waitlist We will inform you when the product arrives in stock.

SKU: N/A Category: Built Whoop Collection Tags: 65mm Whoop, HappyModel, HDZero, Mobula6

HappyModel Mobula6 HDZero BNF 1S Whoop (ELRS/FRSKY)

This is the HappyModel Mobula6 HDZero BNF 1S Whoop.

Introducing Mobula6 HDZero 1S whoop, a new breed of brushless whoops, that can relay HD video to your Hdzero compatible FPV goggles.

HappyModel teamed up with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other whoop enthusiasts to make this amazing setup a reality.

Product Information

Model: Mobula6 HDZERO
Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
Receiver option:
SPI ELRS 2.4GHz
SPI FRSKY 2.4GHz
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: PH2.0

In the box

Item Name	Qty
Mobula6 65mm frame+Canopy	1
SPI Receiver Option1: SuperbeeF4 Lite FC built-in ExpressLRS SPI RX	1
SPI Receiver Option2: SuperbeeF4 Lite FC built-in Frsky SPI RX	1
EX0802 KV19000 Unibell brushless motor	4
Gemfan 1210 31mm propeller(4cw+4ccw)	1
HDZero Nano Lite Camera	1
HDZero Whoop Lite VTX	1
Spare Canopy	1
Propeller disassemble tool	1
Screw driver	1

Flight controller SuperbeeF4 Lite ELRS/FRSKY	SPI ELRS version Firmware target: CrazybeeF4SX1280 SPI FRSKY version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module
Onboard Frsky SPI D8 /D16 2.4GHz Receiver	SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol
Motor	Mode: EX0802 19000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len):Φ10.5mm14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only
Propeller Gemfan 1219 Bi-blades	Weight:0.19g Material: PC Pitch:1 inchProps Dia:30mm Center Hole Dia:1mm
HDZero Nano Lite Camera	14x16x11 mm 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65°
HDZero Whoop Lite VTX	1S Input 25mW/200mW RF Output-SmartAudio Support 25.5×25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5×32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding)