NewBeeDrone FLOW 1202 Racing and Freestyle FPV Micro Motor (Set of 4) 8420KV/11420KV 1.5mm Shaft.
This is Newbeedrone take on the 1202 motor series, the motors come in two variants, the 8420KV (2S) and the 11420KV (1S). If you are planning a lightweight powerful toothpick build, these motors were designed for just such a build.
The Newbeedrone flow 1202 racing motors are made with Aluminium alloy, they are strong with plenty of grunt.
FPV Racing Build.
The Happymodel CrazyF411 is a 2-4s Board and a 20A ESC and has integrated Frsky receiver.
We also stock the FPV Cycle toothpick frames here, that could be used to build a custom FPV racing or Freestyle toothpick.
Your ultimate 2S toothpick could benefit from these motors in combination with the right lipo, we suggest these CNHL 2s Lipo’s.
You will find a few different types and sizes of the 2s Lipo’s here, use the one that suits your build perfectly. But do remember you will need a XT30 connector on whichever board you decide to use in your build.
You could of course opt for an ultra-lightweight 1s build in which case use the Newbeedrone flow 1202 racing 11420KV motor and the iflight 1s 5A AIO flight stack. In this type for FPV drone build we recommend the NewBeeDrone’ S very own brand of Lipo’s the NewBeeDrone Nitro Nectar Gold 300mAh 1S HV.
- 5g w/ wire
- Titanium Alloy TC4 Shaft
- NSK Ball Bearing
- 2mm Silicon Steel Sheets Core
- 30AWG silicone wire with JST1.25 3Pin connector total length 60mm
- 7075 Aluminium Alloy
- 8420KV for 2S battery
- 11420KV for 1S battery
- 5mm shaft
In the box.
- 4 x NewBeeDrone FLOW 1202 motors 1.5mm shaft.
- Other 1200 motors
- NewbeeDrone Web Page.