Volador II VX5 O3 FPV Freestyle T700 Frame Kit

 

We’re excited to announce the release of Volador II VDX O3 , the improved 5″ frame based on feedback from our V1 users and testers. The V2 version is optimized to better suit the needs of pilots, with high compatibility and a simple construction design.

The Volador II VX Frame comes in a Squashed X configuration for maximum control, while the Volador II VD Frame features a Deadcat style configuration with no props in view. Both frames are compatible with a variety of analog and HD systems on the market, with independently detachable arms and a tight-fitting structure design to minimize frame resonance.

Our TPU parts are cleverly designed for a more integrated and neat installation, allowing users to have the cleanest looking builds possible. We guarantee satisfaction, even for pilots with Obsessive-Compulsive Disorder.

We’ve also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, compatible with 19mm/20mm format cameras to eliminate any possible jello in your DVR.

The frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fibre sheets, with a super smooth surface and uniform chamfered edges. Say goodbye to damaged cables and battery straps.

The redesigned battery pad with an added grid has an even better anti-slip effect and uses a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.

The frame comes with all the necessary accessories for analog and HD builds and is equipped with hardware with Loctite thread locking agent for additional reliability. Our TPU parts fit the frame perfectly, improving the overall durability of the frame and looking very smooth. Plus, the Tropical Mix Set is just out of this world!

Product Highlights

• High-end T700 carbon fibre
• Tight structure design minimizes resonance
• The new CNC aluminum camera plates effectively protect the camera
• The silicone shock-absorbers for the O3 AU eliminate jello
• Integrated XT60 connector for safety and reliability
• High-quality TPU parts
• Innovative anti-slip battery pads
• New motor wire protection tubes
• Compatible with both 19/20mm cameras
• Equipped with all accessories needed for analog and HD builds
• 12.9-grade strength hardware with Loctite threadlocker pre-applied
• High electronics compatibility

Product Information

• Arm Thickness: 6mm
• Top plate thickness: 2.5mm
• Middle plate thickness: 2.5mm
• Bottom plate thickness: 2.5mm
• Keystone thickness:5mm
• Side plate thickness:2mm
• CNC Side plate thickness:5mm
• Propeller size: 5~5.1 inch
• Material: T700 carbon plate
• FPV cam spacing: 19mm/20mm
• Weight: 177.4g(with TPU parts)
• Colour: Black/Tropical Mix (Optional)
• Total Dimensions:177mm*165mm Wheelbase:225mm
• Stack mounting holes: 20mm*20mm/30.5mm*30.5mm(M3)
• VTX mounting holes: 20mm*20mm/25.5mm*25.5mm(M2)

In the Box

1 x Volador II VD5 O3 Dead Cat FPV frame kit ( Black TPU)

 

More Information

V1 to V2 notable differences

• The frame is now significantly lighter.
• The new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.
• The new battery anti-slip pad is more “sticky” and has better adhesion.
• Added keystone to even further reduce arm vibration.
• Added bottom screw gasket.
• Added motor wire protection tubes.
• The four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.
• The new TPU arm protectors are now lighter and allow for easier disassembly.
• All models now come with two types of TPU antenna mount (with or without GPS mount).
• The thickness of the bottom and middle plates has been adjusted to 2.5mm.
• The connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.
• XT60 plug cut out on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.

In the Box

1 x Volador II VDX O3 Free Style FPV frame kit ( Black TPU)

 

More Information

V1 to V2 notable differences

• The frame is now significantly lighter.
• The new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.
• The new battery anti-slip pad is more “sticky” and has better adhesion.
• Added keystone to even further reduce arm vibration.
• Added bottom screw gasket.
• Added motor wire protection tubes.
• The four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.
• The new TPU arm protectors are now lighter and allow for easier disassembly.
• All models now come with two types of TPU antenna mount (with or without GPS mount).
• The thickness of the bottom and middle plates has been adjusted to 2.5mm.
• The connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.
• XT60 plug cut out on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.